BondTite Aqua

Bondtite Aqua can be used in following applications:

• Any wooden work for kitchen, wall, terrace, bathroom, etc., where water exposure is high
• For all type of wood of cold press and hot press
• For bonding in all types of wood working like plywood, wood, laminates, veneers, particle boards, block board/hard board, MDF with each other
• Furniture, handicraft, sports goods, packaging and book binding, paper labelling, paper tube, wall paper, carpet manufacturing
• Also recommended for bonding any two material where at lese one of them is porous eg. Paper, card board, particle board, etc. and other related applications

• High initial grab
• Single component ready to use
• Economical in the long run
• 48 hrs continuous water resistance
• 6 hr boiling water resistance
• Gives higher coverage
• Eco-friendly with low odour
• Good spread-ability

Bondtite Aqua has very good spread-ability and can be apply with the help of the Astral Adhesive Resiwood applicato, by brush, roller or fingers. The usual procedure to be followed is:

• Clean both the surfaces to be bonded
• It is ready to use product so dilution is not recommended
• Apply a thin coat of Bondtite Aqua on both or one surface – as per requirement and spread evenly in 5-10 minutes
• Press the two surfaces together and keep under pressure with the help of either a clamp, nails, wooden support, etc., till the adhesive dries completely. Excess adhesive pressed outside the joints should be wiped out with a wet cloth

12 months in a partially filled packing and strictly store in a cool place, away from heat.